Nationwide Cement Mixer Hire
Ideal for both DIY and professional applications, mixing a full wheelbarrow load of concrete or mortar.
Mixing concrete or cement with a mixer is much easier and quicker then conventional methods allowing larger quantities to be produced in a relatively short time. Our cement mixers are built for durability and are the number one choice nationwide. The mixers have full thermal overload protection as well as a NVR (no-volt-return) safety power switch. Used with its stand these highly portable, lightweight and quality machines allow barrow height mixing and tipping.
Technical Information
- Based On: Belle Minimix 150
- Power (hp / kW): 0.75 / 0.55
- Drum Volume: 130l
- Mix Capacity (litres): 90
- Power (hp / Kw): 0.75 / 0.55
- Drum Speed (rpm): 24
- Noise Level (dB): 107
- Dimensions: Width x Height x Length (mm): 597 x 890 x 1211
- Weight without stand (kg): 55
Concrete And Mortar Mixes
There are several different mixes that can be employed. The proportions of each individual element added are dependent on the project. A strong concrete mix is one with a higher percentage of cement, whilst a weaker mix uses less.
General Purpose Concrete = 1:2:3 mix. Perfect for most uses except foundations and exposed paving. It is composed of one part cement, two parts sand and three parts coarse aggregate (if using a combined aggregate, this mix would be 1:4, one part cement to four parts combined aggregate).
Foundation Concrete = 1:2 ½:3 ½ mix. Standard for wall foundations or bases and laying paving slabs, etc. One part cement, two and a half sand and three and a half coarse aggregate (if using a combined aggregate, this mix would be 1:5).
Paving Concrete = 1:1 ½:2 ½ mix. Ideal for exposed paving such as driveways and garage floors. One part cement, one and a half parts sand and two and a half parts coarse aggregate (combined aggregate would need a mix of 1:3 ½).
Standard Mortar = 1:5 mix. For internal or sheltered brick laying. Mix one part cement to five parts soft sand. Add a small amount of lime or one part plasticizer to increase the workability (this type of mix is perfect for an internal block partition wall).
Strong Mortar = 1:4 mix. Used for exposed brickwork. Mix one part cement to four parts soft sand, add a small amount of lime or plasticizer to increase the workability.
Why Choose Lakeside-Hire ?
Concerned that hired equipment might not be up to scratch? You needn’t worry – every piece of equipment is thoroughly checked every time it returns from a job and all the equipment meets Health and Safety rules and regulations. We pride ourselves on exceeding your expectations with every Cement Mixer Hire.
